Xm-satellite-radio P/N 08A15-1E1-000 User Manual

1P/N 08A15-1E1-000XM RADIOOPERATING INSTRUCTIONS

10Receiving XM channels with the XM receiver1. Turn the vehicles radio on to FM and tune to the XM radios modulator fre-quency (between 88.7 to 89.

11Storing XM channel presets1. After tuning in the desired channel, press and hold the rotary knob for 2 seconds ormore until the channel name on the

12Category searchCategory search functionally allows you to search for a specific channel by the category of pro-gramming it offers, or to surf within

13Changing the displayText information, such as the channel name, artist name/feature, and song/program tittle, isavailable with each XM channel. This

14If you encounter a problem, please review the items listed below. This guide will help you to isolatethe problem. Make sure the rest of your system

15• The XM antenna is not connected to the XM radio module- Check whether the XM antenna cable is attached securely to the XM radio module.UPDATING• X

16• XM radio is acquiring audio or program information- Wait until the radio has received the information• The channel currently selected has stopped

17RF MODULATOR UNITRF Output Frequency (selectable) 87.7-89.9 MHzRF Output Voltage 70 dBµVRF Modulator input Sensitivity/Impedance 500mV/10 k OhmsRec

18REF. NO. MR0HL21008A15-1E1-000-81Printed in U.S.A© 2003 American Honda Motor Co., Inc - All Rights Reserved.

2General information……………………………………...…………..3Initial Setup……………………………………………………………6Operation………………………………….…………………………10Troubleshooting…..…………………………………………

3The XM service is based on two satellites that have fixed positions over theequator. One satellite for the east coast of the United States and the ot

4Satellite signals are received best in the areaswhere there are no tall buildings, trees or tallobjects that can obstruct the signals.Locations where

5Sound in your carThe signal is broadcast in a digital format so that if you do run into asituation where both the satellite antenna and the ground

6Turning power on and off1. Press the SOURCE POWER button to turn the unit on.NOTE: The unit can be turned on by pressing any of the buttons of the

7Modulator frequency setting1. Press and hold the DISP SETUP for 2 seconds or more.2. Turn the rotary encoder or press the 6 or 5 button to select the

8XM level setting (XM output level)When your XM receiver is connected to the factory installed radio, this feature willallow the user to choose betwee

9Scrolling featureThis feature allows the broadcast text information such as artist, song tittle andstation information to move continuously across th